With this command, 1992 can place the top molding in the unit
of the floorplan.
Select the button Items.
At the left side of the windows Items you can see the available
options of items. Select the option Top Molding.
In the field Path, you see the active catalog and the
active item category.
In the left side you see the items of the selected category.
In the right side you see the items.
In the field Description you see the description of
the selected item.
Also, there are the tabs below.
- Tab show: you can see the top molding preview
that you selected.
- Tab technical specifications: it refers to
the technical part of the item.
Placement: close the "Top Molding" and display
the floorpaln which you will place the top molding.
Cancel: cancel the selection from the window "Top
Molding". Also, use this button to close the window.
Edit: appear the window "Item edit ",
you can change dimensions, specifications, prices and options of
top molding, before the placement. (The same window will open if
you double left click on the selected item in the "Top Molding").
Attachments: appear the window “Attachments”.
Ěodels: show here the selected model (what you
set as the basic model in the window Select Model). From the list
below you can select a different model and the change would apply
only to the active item.
Click the Top Molding you wish to enter and then click Placement.
The floorplan is appeared with base and wall items at right and
left a control panel for the Top Molding.
|
In order to place properly the top molding the items should
look white. Items with red or green markings have different
alignment (height) than it should and if you place them top
molding, it will be placed at the wrong height.
Item Alignment: the list below is showed the
alignments of the installed base units. In the empty field right,
you can manually enter the alignment you want.
Automatic Updates: always have enabled this
command to automatically recognized all the new alignments.
Item Lenght: The value is determined by moving
the cursor. In the blank field you can write to mm the length
you want and press Lock F2 the dimension of the active top molding.
Item Angle: this is determined by moving the
cursor. In the blank field you can write in degrees the angle
you want and press Lock F3 the angle of placement of the top
molding. You can change the angle of placement and the arrows
that appear in the same context or using keyboard arrows. |
Joint: You can select the type of union in the
placement of the bottom molding. The available options are:
|
Diagonal: the top molding will link diagonal. |
|
Simple (1-->2): cut the fisrt top molding
and then the second. |
|
Simple (2-->1): the second top molding
starts after the first is placed. |
|
Subtraction (1-->2): remove part of the
second top molding and the first is situated on the blank space. |
|
Subtraction (2-->1): remove part of the
first top molding and the second is situated on the blank space. |
|
Simple: the union is normal. |
Finish: here you can choose the style at the start
and end of the top molding. The options are:
|
Simple: the finish is normal, there is no
change in the shape of the top molding. |
|
Subtraction:remove a small piece of the external
edges of the top molding. |
|
Skew: the external angles are cut in skew.
|
|
Curved: the external angles create a curved.
|
After making all necessary arrangements, press left-click to start
the placement of the top molding and continue to left click with
the other markers.
After placing the top molding, press right-click to modify the part
of it, select Size - shape edit .
You can edit the top molding and change the height the depth. The
procedure is similar to that follow to the design surface for resizing.
From menu "Placement" select "Items"
or press Escape (ESC). The command is deactivated and returned
to the floorplan of the project. Get the perspective to see the
top molding.
|