With this command, 1992 can place the plinth in the unit of the
floorplan.
The plinth can be shown to the perspective or the elevation by pressing
the button "Activate special plinth".
Select the button Plinth.
At the left side of the windows Items you can see the available
options of items. Select the option Plinth.
In the field Path, you see the active catalog
and the active item category.
In the left side you see the items of the selected category.
In the right side you see the items.
In the field Description you see the description
of the selected item.
Also, there are the tabs below.
- Tab show: you can see the worktop preview that you selected.
- Tab technical specifications: it refers to the technical part
of the item.
Placement: close the "Plinth" and display
the floorpaln which you will place the Plinth.
Cancel: cancel the selection from the window "Plinth".
Also, use this button to close the window.
Edit: appear the window "Item edit ",
you can change dimensions, specifications, prices and options of
Plinth, before the placement. . (The same window will open if you
double left click on the selected item in the "Plinth").
Attachments: appear the window “Attachments”.
Ěodels: show here the selected model (what you
set as the basic model in the window Select Model). From the list
below you can select a different model and the change would apply
only to the active item.
Click the Plinth you wish to enter and then click Placement. The
floorplan is appeared with base and wall items at right and left
a control panel for the Plinth.
|
In order to place properly the plinth the items should look
white. Items with red or green markings have different alignment
(height) than it should and if you place them plinth, ti will
be placed at the wrong height.
Item Alignment: the list below is showed the
alignments of the installed base units. In the empty field right,
you can manually enter the alignment you want.
Automatic Update: always have enabled this
command to automatically recognized all the new alignments.
Item Lenght: The price is determined by moving
the cursor. In the blank field you can write to mm the length
you want and press Lock F2the dimension of the active plinth.
Item Angle: this is determined by moving the
cursor. In the blank field you can write in degrees the angle
you want and press Lock F3 the angle of placement of the plinth.
You can change the angle of placement and the arrows that appear
in the same context or using keyboard arrows. |
Options
Joint: You can select the type of joint in the
placement of the plinth. The available options are:
|
Diagonal: the pieces will link diagonal.
|
|
Simple (1-->2): cut the fisrt worktop
and then the second. |
|
Simple (2-->1): the second worktop starts
after the first is placed. |
|
Subtraction (1-->2): remove part of the
second plinth and the first is situated on the blank space. |
|
Subtraction (2-->1): remove part of the
first plinth and the second is situated on the blank space. |
|
Simple: the joint is normal. |
Finish: here you can choose the style at the start
and end of the plinth. The options are:
|
Simple: the finish is normal, there is no
change in the shape of the plinth. |
|
Subtraction: remove a small piece of the
external edges of the plinth. |
|
Skew: the external angles are cut in skew.
|
|
Curved: the external angles create a curved.
|
After making all necessary arrangements, press left-click to start
the placement of the plinth and continue to left click with the
other markers.
Edit placed plinth
After placing theplinth, press right-click to modify the part of
it, select Size - shape edit .You can edit the plinth and change
the height the depth. The procedure is similar to that follow to
the design surface for resizing. From menu "Placement"
select "Plinth"
or press Escape (ESC). The command is deactivated and returned
to the floorplan of the project. Get the perspective ang press "Activate
special plinth".
|